How do I turn on the Tempest Torch?

To ignite the torch in dry weather, push the valve control knob in, turn it counter-clockwise to the start position, and continuously rotate the manual igniter clockwise to generate a spark. Once the burner lights, you must keep the valve control knob pressed down for 15 seconds to ensure the flame stays lit. If it is raining or wet outside, you can light the unit by passing a wand lighter directly through the designated wet-weather opening while holding the control knob in.

How to connect a gas torch?

Connecting the gas supply requires a qualified technician to run a dedicated fuel line through a chosen wall, post, or pier mounting assembly. A manual shutoff valve must always be installed upstream of the flexible gas connector line for proper safety controls. After attaching the torch body securely to both the mount and the fuel connection, a comprehensive soap-and-water test must be performed to check all joints for gas leaks before regular use.

How to clean your Tempest Torch?

Before initiating any cleaning, shut off the gas supply and allow the entire appliance to cool down completely. You can clean the exterior glass panels by loosening their individual retaining screws, sliding each pane horizontally out of its track, and wiping them down with standard glass cleaner or warm soapy water. To clear out internal debris like leaves or insects, remove one glass pane, lift the internal pyramid-shaped spreader plate straight up, and carefully brush out any foreign material.

How do I install a Tempest Torch?

This decorative appliance is strictly rated for outdoor use and must be set up by a qualified installer in a well-ventilated exterior area. It requires a specialized base assembly, such as a post, pier, or wall mount kit, and must maintain clear safety margins of 26 inches above the glass and 8 inches on all sides from combustible objects. The setup sequence involves running the gas line, fastening the torch head to the mount, putting together the internal burner elements, installing the glass panes, and leak testing the system.

How to winterize a Tempest Torch?

To protect the appliance during the winter months or long stretches of inactivity, start by turning off the main gas supply line. Next, place the protective rain cap flat over the top plate of the unit. If your climate requires additional defense against heavy snow or debris, you can place a specialized fabric cover over the entire setup, ensuring it fits loosely enough that it doesn't apply damaging pressure to the glass.

Tempest Torch

Tempest Torch, the architectural lighting division of Travis Industries, uses a patented aerodynamic design to create a natural venturi effect that spins flames inside a tall glass column without fans or moving parts. Featuring electronic ignition models, manual torches, lanterns, wall mounts, and pillars, their lineup delivers a quiet, reliable flame that elevates any outdoor setting.