The Outdoor Plus

The Outdoor Plus produces handcrafted gas accent lighting, bringing artisanal fire features to luxury landscapes within the outdoor heating and patio catalog. Browse their complete line of outdoor gas torches here and find the handcrafted flame feature designed for your property.

The Buyer's Guide to The Outdoor Plus Gas Torches

Match Lit Tiki Torches: Mechanical Control

The Outdoor Plus Match Lit Tiki Torches prioritize complete mechanical dependability. They require absolutely no electrical wiring or external power sources to operate.

You manually open the gas supply line using a physical key valve. Then, you ignite the burner head safely using a long match or lighter.

A built-in needle valve gives you direct physical control over the fire. You simply turn the valve to adjust your flame height or shut the gas flow off completely. This straightforward mechanical design provides a highly reliable choice for remote property lines. 

If you prefer a completely manual setup that uses natural fluid dynamics to spin the flame instead, look into the alternative engineering of a Tempest Torch.

Electronic Tiki Torches: Low-Voltage Automation

The Electronic Tiki Torch configuration introduces premium push-button automation to your backyard hardscaping. It relies on an advanced All-Weather Electronic Ignition System to manage the flame.

This automated system operates exclusively on a safe 12V DC power supply. You must never attempt to connect 110V power directly to the torch mechanics.

An outdoor transformer converts your standard household AC voltage down safely. The manufacturer strongly recommends running a minimum of 12-gauge wire for all electrical lines to ensure adequate amperage reaches the igniter. For commercial projects requiring heavily certified, automated stainless steel alternatives, explore the safety-first options from HPC Fire.

Electronic Timing and Safety Sequences

The low-voltage electronic system utilizes an intelligent internal startup sequence to ensure safe outdoor operation.

  • Pre-Purge Phase: The system clears out the combustion area for 3.25 seconds before heating the igniter.
  • Igniter Warm-Up: The hot surface glow plug heats up for 5 seconds before the main gas valve opens.
  • Flame Verification: A flame should be fully visible within 10 seconds of power application.

An internal sensor monitors the status of the fire continuously. If a heavy wind gust blows the flame out, the system reacts within 16 seconds maximum to close the gas valve safely. This advanced environmental monitoring provides excellent peace of mind, competing directly with the protective technologies engineered by Fire By Design.

Gas Pressure and Installation Infrastructure

Both the electronic and match-lit tiki styles share identical physical footprint requirements. Proper utility planning is essential before pouring your concrete.

Installation requires a hole that is at least 12 inches deep to secure the heavy base pole. The fuel delivery infrastructure hooks up to a standard 1/2-inch gas riser pipe. Natural gas setups require a nominal input pressure of 7.0 inches Water Column. Liquid propane systems require a higher nominal pressure of 11.0 inches Water Column to operate efficiently.

Always maintain strict safety clearances around the open burner head. These fixtures demand 96 inches of vertical overhead clearance and 24 inches of horizontal side clearance from any combustible materials.

Ready to Bring Light to Your Patio?

The Outdoor Plus delivers a category of outdoor gas torch that cannot be matched by standard fabrication, combining artisanal material craft with precise gas engineering to create fire features that define the visual character of luxury outdoor spaces. Whether you are planning a smart ignition control system, specifying concrete footers for a post-mount installation, or protecting a hammered copper bowl in a pool environment, our NFI certified experts are ready to guide every detail. Call us today for expert support, and enjoy free shipping on all qualifying orders over $99.

Frequently Asked Questions About The Outdoor Plus

  • What type of fuel and gas pressure does The Outdoor Plus Tiki Torch require?

    The torch is certified exclusively for outdoor use with either natural gas or liquid propane. According to The Outdoor Plus Match-Lit Tiki Torch Owner's Manual, the nominal input pressure required is 7.0" W.C. for natural gas and 11.0" W.C. for propane. Installers must verify the appliance label to confirm gas compatibility before making any supply connections.

  • How do you adjust the flame and turn off the match-lit tiki torch?

    You can adjust the flame size by turning the needle valve clockwise to reduce the flame or counterclockwise to increase it. To shut off the torch completely, turn the needle valve to the left until it stops and confirm that the flame has fully extinguished. Always give the appliance sufficient time to cool down before handling or covering it.

  • What are the clearance requirements from combustible materials for the tiki torch?

    Adequate clearance must be maintained, starting with a mandatory 96 inches of open space directly above the unit. The torch also requires a 24-inch clearance from all sides and a 6-inch clearance from its bottom base. Strictly adhering to these specified clearances is necessary to prevent property damage or severe burn hazards.

  • What gas type and pressure requirements does the Electronic Tiki Torch have?

    The Outdoor Plus Electronic Tiki Torch is certified exclusively for outdoor use with either natural gas or liquid propane. It requires a nominal input gas pressure of 7.0" W.C. for natural gas and 11.0" W.C. for liquid propane. Installers must check the appliance label to verify gas type compatibility before making any supply connections.

  • What are the electrical requirements for the Electronic Tiki Torch?

    The torch's electronic ignition system runs exclusively on a 12V DC power supply, and attempting to power it directly with 110 Volts will cause system damage. The supplied transformer safely handles AC input voltages ranging from 110V up to 240V. Additionally, a minimum wire size of 12-gauge must be used for all installation wiring.